SENSORS
|
The delivery program includes sizes with diameters 3 mm smooth and M4 in an embeddable execution. These are the smallest self-contained inductive proximity switches available on the market with fully integrated evaluation electronics. These sizes, introduced by CONTRINEX, are not yet standardized. All devices are available in 3-wire DC,
NPN and PNP executions. Additionally, the range contains devices with 2 wires
according to NAMUR (DIN /
EN 19234). All 3-wire models are available in N.O. and N.C. configuration; a
LED output state indicator is standard. In addition, all the important
protection Functions are built in, such as short-circuit and
overload protection, full polarity reversal protection, over voltage
protection, EMC protection, power-on reset, etc. (only partially for NAMUR
devices). CE conformity is achieved without the external protective circuit
authorized according to the standard (EN 60947-5-2 / 7.2.3.1). |
The
delivery program includes sizes With
diameters 4 mm smooth, M5 Threaded,
as well as the rectangular 5 x 5 x 25 mm with through holes for fixing, all in
embeddable execution. A further device with 4 mm diameter is distinguished by
its very short length of only 10 mm (only in NAMUR execution). Also
introduced by CONTRINEX, these sizes are now standardized for the most part.
All devices are available in 3-wire DC, NPN and PNP executions. Additionally,
the range contains devices with 2 wires according to NAMUR (DIN / EN 19234).
All 3-wire models are available in N.O. and N.C. configuration; a LED output
state indicator is standard. In addition, all the important protection
functions are built in, such as short- circuit and overload protection, full
polarity reversal protection, over voltage protection, EMC protection,
power-on reset, etc. (only partially for NAMUR devices). CE conformity is
achieved without the external protective circuit authorized according to the
standard (EN 60947-5-2 / 7.2.3.1). |
|
The
delivery program includes sizes with diameters 6.5 mm smooth and M8. These
devices are distinguished by their extremely short lengths. The execution
with right-angled cable output permits a further
reduction in length. Introduced by CONTRINEX, these sizes correspond to all
relevant standards, with the exception of their length. All devices are
available in 3-wire DC, NPN and PNP executions. Additionally, the range
contains devices with 2 wires according to NAMUR (DIN / EN 19234). All 3-wire
models are available in N.O. and N.C. configuration; a LED output state
indicator is standard. In addition, all the important protection functions
are built in, such as short- circuit and overload protection, full polarity reversal
protection, overvoltage protection, EMC protection, power-on reset, etc.
(only partially for NAMUR devices). CE conformity is achieved without the
external protective circuit authorized according to the standard (EN
60947-5-2 / 7.2.3.1).
|
The delivery
program includes sizes with diameters from 6.5 mm smooth to M30 in
quasi-embeddable and non-embeddable executions. These sizes are standardized.
Varying from the standard, the series 500 offers however greater operating
distances (2.2 ... 3 times the standard values). All
devices are available in 3-wire DC, NPN and PNP executions. All 3-wire models
are available in N.O. and N.C. configuration; a LED output state indicator
is standard. In addition, all the important protection functions are built
in, such as short-circuit and overload protection, full polarity reversal
protection, overvoltage protection, EMC protection, power-on reset, etc. The
range additionally includes devices with analog output. A voltage output (0
... 5 V) and a current output (1 ... 5 mA) are simultaneously available. For
the moment, quasi-embeddable devices with sizes M12, M18, and M30 are available. |
|
Cylindrical Housings This
range of proximity switches comprises all widely used sizes from 6.5 mm to M30,
according to the standards IEC 947-5-2 / EN 60947-5-2 and VDE 0660 part 208.
All switches are available in 3-wire DC, PNP and NPN versions, with cables or
connec- tors.
Sizes M12, M18 and M30 are also available
as 2-wire models (for 20 ... 265 VAC, or 20 ... 320 VDC). All types are available
in N.O. and N.C. configuration. A LED output state indicator is standard. In
addition, protection circuitry against the following is built-in: short
circuits and over- load protection (3-wire DC models), full voltage reversal
protection, induction and EMC protection (according to IEC 255-5, IEC
1000-4-1, IEC 1000-4-2, IEC 1000-4-3 and IEC 1000-4-4), power-on reset, etc. |
In
addition to the cylindrical models, series 600 also includes square types in
sizes 40 x 40 mm (IEC I1C40 / I2C40), 60 x 40 mm and 80 x 40 mm (IEC I2D80).
These are equipped with screw terminals for easy connection. All types are
available as 3- wire DC PNP models, and some also as NPN
models or as 2-wire UC (AC / DC) versions. LED and protection circuitry are
as for cylindrical types. High-quality plastic housings (mostly glass-fiber
reinforced PBTP) ensure the excellent mechanical stability of these switches. |
|
This
series features a great variety of sizes and functions in widely used
standardized cylindrical
housings (smooth and threaded types). It will be available in the following sizes:
Æ 4 mm, M5, Æ 6.5 mm, M8, M12 and M18. At the time of printing
this catalog, models
with Æ 4 mm, M5, M12 and M18 were in mass production. Devices Æ 4
mm and
M5 are the smallest self-contained photoelectric proximity switches on the market.
They are intended to replace larger models in case of space problems, and optical fibers if their application is too com-
plicated. They may even be used instead of the same size
inductive switches if the operating distances of the latter are in-
sufficient. |
|
This
series offers very high performance and a complete range of functions in a
miniature rectangular housing (30 x 30 x 15
mm): energetic diffuse sensors, diffuse sensors with background suppression,
re- flex sensors, through-beam sensors and fiber
optic amplifiers for plastic and glass fibers. Despite their small size, they
aredesigned as robust devices for demand- ing industrial applications, with
all the usual protection functions included. Series 3031 This
series provides good performance combined with moderate cost. It is intended
for general use, particularly where small size is required (miniature housing
30 x 30 x 15 mm). The same range of functions as for 3030 series is
available: energetic diffuse sensors, with background suppres- sion, reflex
sensors, through-beam sen-sors and fiber optic amplifiers for plastic and glass
fibers. Despite the cost advan- tage, they meet the highest requirements for
heavy-duty industrial applications. Series 4040 Maximum
performance capability is pro- vided in a rectangular housing with dimen-
sions 40 x 40 x 19 mm. They are true solution providers, thanks to sensingranges of 2 m (diffuse sensor) and 6 m (reflex
sensor). As a result of built-in power saving modules, these values are
attain- able with very low power consumption and low heat build-up, thus
simplifying system design, and increasing reliability. They are available as
diffuse sensors, reflex sensors, through-beam sensors and fiber optic
amplifiers for glass fibers. |
|
This
series is suitable for conveyors and other applications where extremely
robust equipment
in large housings is necessary. They are provided with an extensive func- tional
program contained in a 61 x 83 x 25mm housing. Available models include energetic
diffuse sensors, diffuse sensors with background suppression, reflex sen- sors,
and through-beam sensors. All models are available in 3-lead DC or combined
AC-DC (20–265 VAC, 20–320 VDC) execution with relay output. Con- nection is via plugs or screw
terminals. All variations can be delivered with a timer. |
CAPACITIVE SENSORS
|
|
|
|
|
For more information please send as your request by fax or e-mail |
|
|
